Toshiba HD-XA2KN - Manual (Page 25)

Introduction
Connections
Playback
(Basic)
Playback
(Advanced)
Others
25
2
Chapter
2
Connections
Internet
connection
Connecting to an audio system
Caution
When you are connecting (via the DIGITAL AUDIO OUTPUT BITSTREAM/PCM jack) an AV decoder that does not
have Dolby Digital, DTS or MPEG decoding capability, be sure to set “Digital Out SPDIF” ( page 55) to “PCM”.
Otherwise, high volume sound may damage your hearing as well as the speakers.
Via HDMI output
You can enjoy the benefi ts of Dolby Digital Plus or Dolby TrueHD by connecting the HDMI output of your player
to an AV receiver with an HDMI audio input. You can listen to down-converted Dolby Digital Plus and Dolby
TrueHD as well as Dolby Digital and DTS using a receiver with Dolby Digital and DTS decoding capabilities and
an optical digital input.
Via digital audio output
AV amplifier
Optical digital cable
(not supplied)
Digital input
Coaxial
Digital input
Optical
or
75 7 coaxial cable (not supplied)
HDMI compatible device
HDMI cable
(not supplied) HDMI cable
(not supplied)
You may need to adjust the HDMI
audio output to match the
capabilities of your AV amplifier.
In this case, set “Digital Out
HDMI” ( page 55) to “PCM”.
AV amplifier
HDMI input
HDMI output HDMI input
Make the connection as below, and set “Digital Out HDMI” ( page 55).
Make the connection as below, and set “Digital Out SPDIF” ( page 55).
HD-XA2KN_02_E.indd 25 HD-XA2KN_02_E.indd 25 06.12.5 0:23:52 PM 06.12.5 0:23:52 PM