Camera parts and functions, Front] [rear – Toshiba IK-SX1L User Manual
Page 6
6
1
1
1
1
1 Picture-shooting area
The protection cap is attached on the lens mount portion. After removing the cap, mount
the lens. Be careful not to scratch or touch the optical area.
2
2
2
2
2 DC IN 12V terminal
Accept a DC power input (12V).
3
3
3
3
3 MODE SELECT switch
Selects the gain mode (OFF/ON).
Selects the synchronizing output signal (HD, VD/LEN, FEN).
Selects the operation mode.
Selects the electric shutter exposure time.
Selects the partial scanning mode.
4
4
4
4
4 GAIN control volume
Adjusts the video signal gain when the gain mode is set to ON with the MODE SELECT
switch 3
3
3
3
3.
5
5
5
5
5 DIGITAL terminal
IK-SX1L: Outputs the EIA RS-644 LVDS 8-bit digital signal. Enters a trigger signal.
IK-SX1: Outputs the Camera Link signal (8-bit digital signal). Enters a trigger signal.
3. CAMERA PARTS AND FUNCTIONS
DC IN 12V
MODE SELECT
DIGITAL
GAIN
[Front]
[Rear]
DIGITAL terminal
5
GAIN control volume
4
MODE SELECT
switch
3
DC IN 12V terminal
2
Picture-shooting area
1