Connections, Standard connection, Cautions on connection – Toshiba IK-SX1L User Manual
Page 7: Connector pin assignments <ik-sx1l, ik-sx1
7
4. CONNECTIONS
4.1. Standard Connection
Lens
IK-SX1L
IK-SX1
Image processor
DC IN 12V
DC power supply
Camera cable
(option)
4.2. Cautions on Connection
• When connecting the camera cables, be sure to turn off the camera and the other
equipment connected.
• The lens for high resolution is recommended.
When using another lens, the best camera performance of this camera may not be
obtained.
(For example, low resolution may occur, and flare, ghost or shading may occur)
• For DC power supply connecting to DC IN 12V terminal, use UL listed and/or CSA
approved ungrounding type AC adaptor with the specifications described below.
Power supply voltage: DC12V
±
10%
Current rating: More than 830 mA, Less than 2.5A
Ripple voltage: Less than 50 mV(p–p)
Connector: HR10A–7P–4S by HIROSE electronics Co. Ltd
Pins 1, 2: +12V
Pins 3, 4: GND
4.3. Connector Pin Assignments
<IK-SX1L, IK-SX1>
1
2
3
4
1
2
3
4
DC IN 12V
+12V
+12V
GND
GND
Hirose Electronics Co. Ltd. HR10A-7P-4PB