Toshiba W-808 - Manual (Page 12)

12
S-VIDEO Connection
The S-VIDEO jack is also available to connect to your TV.
This set-up will enable you to:
– record an unscrambled channel.
– watch an unscrambled channel while recording it.
– record an unscrambled channel while watching
another (only when you connect a cable-
compatible TV).
You will need to:
• select TV channel 3 or 4 to receive video
signals. (See page 11.)
• to record a channel while watching another,
press TV/VCR on the remote control to turn off
the “VCR” indicator in the VCR display and
select a desired channel on the TV (only when
you connect a cable-compatible TV).
This set-up will enable you to:
– record an unscrambled channel.
– watch an unscrambled channel while recording it.
– record an unscrambled channel while watching
another (scrambled or unscrambled).
You will need to:
• set TV channel to the output channel of the
cable box.
• turn on the cable box and select cable channel 3
or 4 according to the output channel of the VCR.
• to record a channel while watching another,
press TV/VCR on the remote control to turn off
the “VCR” indicator in the VCR display and
select a desired cable channel on the cable box.
Connections (continued)
Incoming cable
Cable Box
Incoming cable
IN OUT
Cable Connection
Choose one of the below according to your usage of the cable box.
S-Video Cable
(supplied)
Audio/Video Cable
(supplied)
When connected your TV using the
S-VIDEO OUT jack
To watch video pictures, set the video input mode
on your TV. For the video input mode, refer to the
manual of your TV.