M-AUDIO Biport 2x4s - Manual (Page 29)

Click on the arrows next to each number to change them to match the
start time you want to use.
Change these numbers to match your desired user bits settings. The
<Tab> key will move you to the next field.
Menus
Following are brief explanations of the program menu choices.
File
Load Config
Retrieve a previously saved SMPTE configuration. A “factory” configu-
ration is included during program installation. If the Save current con-
figuration before loading new one box is checked, the current configura-
tion file will be automatically overwritten with the current settings. If
the Save current configuration before loading new one box is not
checked, you can lose your current configuration if you haven’t previ-
ously saved it. Be careful.
29