M-AUDIO Biport 2x4s - Manual (Page 30)

Save Config
Save the currently active SMPTE configuration. All aspects of the
SMPTE settings (start time, user bits, etc.) are saved with the configura-
tion file.
Delete Config
Delete a SMPTE configuration from the provided list.
Confirm Exit
If this is checked, you will always be asked to confirm that you actually
want to quit the program (a good choice for people who are mildly para-
noid about losing any of their work). On the other hand, if you are irri-
tated by the confirmation dialog and don’t want to be re-asked each time
you choose to exit the program, uncheck this selection.
Exit
Quit the program. If the Confirm Exit option is checked (see above) the
program will have you confirm that you want to quit before it actually
closes.
Hardware
Current Status
This selection gives you the current status of the BiPort MIDI drivers,
and displays whether or not the BiPort hardware is present and detect-
ed. The BiPort internal firmware revision is also displayed here if the
BiPort is present and detected.
30