Toshiba SD-5915SC - Manual (Page 17)

17
Connections
COAXIAL
*
COAXIAL
Connecting to an amplifier equipped with a Dolby Digital decoder
Dolby Digital
Dolby Digital is the surround sound technology used in theaters showing the
latest movies, and is now available to reproduce this realistic effect in the
home. You can enjoy motion picture and live concert DVD video discs with this
dynamic realistic sound by connecting the DVD video player to a 6 channel
amplifier equipped with a Dolby Digital decoder or Dolby Digital processor. If
you have a Dolby Surround Pro Logic decoder, you will obtain the full benefit
or Pro Logic from the same DVD movies that provide full 5.1-channel Dolby
Digital soundtracks, as well as from titles with the Dolby Surround mark.
Manufactured under license from Dolby
Laboratories. “Dolby”, “Pro Logic” and the
double-D system are trademarks of Dolby
Laboratories. Confidential unpublished
works. Copyright 1992-1997 Dolby
Laboratories. All rights reserved.
• Use DVD video discs encoded via
the Dolby Digital recording system.
• Make the following setting.
On-screen display Select Page
“Digital Out”
Connecting to an amplifier equipped with a Dolby Surround Pro Logic
Dolby Surround Pro Logic
You can enjoy the dynamic realistic sound of Dolby Surround Pro Logic by
connecting an amplifier and speaker system (right and left front speakers, a
center speaker, and one or two rear speakers).
• With an amplifier equipped with Dolby Digital
Connect the equipment the same way as described in “Connecting to
an amplifier equipped with a Dolby Digital Decoder.” Refer to that
amplifier’s owner’s manual and set the amplifier so you can enjoy Dolby
Surround Pro Logic sound.
• With an amplifier not equipped with Dolby Digital
Connect the equipment as follows.
Amplifier equipped with a
Dolby Digital decoder
To COAXIAL type digital
audio input
To COAXIAL
DIGITAL
AUDIO OUT
75
Ω
coaxial cable
• Make the following setting.
* Connect one or two rear speakers.
The output sound from the rear
speakers will be monaural even if you
connect two rear speakers.
Amplifier equipped with Dolby
Sourround Pro Logic
To audio
input
To ANALOG
AUDIO OUT
Audio cable
On-screen display Select Page
“Digital Out”
38
43
38
43
“Raw”
or “PCM”
“Raw”
or “PCM”