T+A Elektroakustik DD 1535 R - Manual (Page 8)

8
Remote control of the Surround Decoder
General information
The digital surround decoder can be controlled using the
F6, F12 remote control handset, or the F1 system
remote control unit. If you are using the F1 handset, it
must first be switched to Hi-Fi mode.
The decoder receives its remote control commands via the
R
LINK master device. Press the     button to switch it
on; it switches itself off when the Master device is turned off.
In the drawings some of the buttons are filled in
(
   ); these are the ones which are required for
remote control of the decoder. The other buttons have no
effect on this unit.
CD/ DVD
AUX
TAPE
OK
STOP
PLAY
M
E
N
U
PRE
AMP LD FLAT /
SRND
TUNER
TV / STB
VCR
F12
A
O
V
L
+
