TC Electronic G-Natural - Manual (Page 12)

10 - Mic Pass Thru
This connects directly to the microphone input and is
used to connect directly to a mixing console. When
connecting microphones that require phantom power,
you have the option of using the phantom power from
either G-Natural or the mixing console.
WARNING! Please note that using phantom power
from both the mixing console and G-Natural
simultaneously will result in too much power and
possible damage to the microphone.
11 - Mic Input
Balanced microphone input.
12 - Mic Level knob
Controls the input gain of the mic input.
13 - -20 dB button
Press to attenuate the mic input by 20 dB to handle e.g.
high output condenser microphones.
14 - Mic In Select button
This switch enables the mic input. When not pressed (out
position), G-Natural defaults to the line input.
15 - Limiter button
This enables the VOS™ optical limiter on the mic input.
16 - +48V button
This enables +48V phantom power on the mic input.
WARNING! Never plug single ended (unbalanced)
microphones or instruments or signal processors
(balanced or unbalanced) into the mic input if +48V
phantom power is on.
17 - Power In
The switchmode power-supply accepts from 100 to
240VAC.
REAR PANEL VIEW
10