TC Electronic G-Natural - Manual (Page 13)

11
TYPICAL SETUPS
Guitar with piezo pick-up
MIXER
Instrument input
algorithm select
mod delay
menu
subdiv comp EQ boost reverb
BANK UP
BANK DN
COMP
1 2 3
MOD DELAY
BOOST
/TAP TEMPO
REVERB
store levels
G•NATURAL
factory
default 4 3 2 1
VARIATIONS
hold to save
boost flanger plate p.pong stomp EQ chorus room reverse dynam tape vibrato analog detune clean thicken
studio tremolo hall spring 3
3 +
+ +
Decay PreDly Color MixMM
1.2s 250ms 100% 25%
edit A edit B edit C edit D
preset bank | tune
Guitar with an
active pick-up system
LR outputs
This is a typical setup with a standard acoustic guitar
with an active* piezo pickup system.
Connections
•
Connect your guitar to the G-Natural’s instrument
input
• Connect L/R outputs to a mixer or to a dedicated
acoustic guitar amp
When connecting the G-Natural outputs to
microphone inputs on a mixing console, the
phantom power for these channels MUST be
switched off! Otherwise you may damage the
G-Natural circuits.
* If the pickup system requires the use of a battery the
system is active.
Basic settings
•
Set input sensitivity via the Levels menu
• Select active effect pressing the COMP, MOD,
DELAY and REVERB switches