Toshiba SD-480EKE - Manual (Page 12)

12
Connections
Connecting to a TV
Connect the DVD player to your TV.
Connections
SCART cable
(not supplied)
To AV
Connecting to a TV (Using the SCART socket)
Connecting to a TV (Using the phono type jacks)
Notes
• Refer to the owner’s manual of the connected TV as well.
• When you connect the DVD player to your TV, be sure to turn off the power and unplug both units from the wall outlet before making
any connections.
• If your television set has one audio input, connect the left and right audio outputs of the DVD player to a Y cable adapter (not
supplied) and then connect to your TV.
• Connect the DVD player directly to your TV. If you connect the DVD player to a VCR, TV/VCR combination or video selector, the
playback picture may be distorted as DVDs are copy protected.
• Analogue audio out will not have sound if DTS playback is selected.
Audio/Video cables (not supplied)
To 2ch AUDIO OUT
(R: red, L: white)
To VIDEO
OUT
(yellow)
Normal TV
To video
input
(yellow) To audio
input
• Make the following setting.
On-screen display Select: Page
“Off”,
“PCM” or
“Bitstream”
“Digital Output”
“Video Output”
Component
RGB
P-Scan
HDMI
34
34
• Make the following setting.
On-screen display Select: Page
“Video Output”
Component
RGB
P-Scan
HDMI
34
Normal TV