Toshiba SD-480EKE - Manual (Page 37)

37
Function setup
HDMI Control
You can control this DVD unit from TV’s remote which is
connected via HDMI cable.
1) Press SETUP button.
2) Press / button to select Misc.
3) Press button, then use the / button to select
HDMI Control.
4) Press ENTER button, then use the / button to
select the On or Off mode.
5) Press SETUP button to exit the menu.
Functions available for the HDMI Control
• One touch play
When the operations with following buttons of this
unit’s remote control are performed, the TV will
automatically switch to appropriate input channel.
Button for one touch play: [PLAY] (make sure a disc
is inserted.)
• System information
Get & Set Menu Language:
This unit recognizes the OSD languages set for the
TV and automatically set the same language as the
player menu language (OSD menu language) for this
unit.
Power off:
When you turn the TV off, this unit will automatically
turns off.
Receiving operational signal from TV’s Remote:
You can operate this unit with TV’s remote control.
Check your TV owner’s manual for details.
Notes
• This function may not work properly depending on
the TV you are connecting.
• If the Video Output is not set to “HDMI”, HDMI Control
will not work.
• Other components must be compatible with HDMI Control
in order to use this function.
Screen saver : On
HDMI Control Off
On
Off: To deactivate HDMI Control.
On: To activate HDMI Control.