Wearing eztalker digital – Tekkeon ET3000 User Manual

Page 8

Advertising
background image

6

To Cancel Pairing Mode

While you are in pairing mode, you can cancel the pairing process and turn off the headset.

1. While in pairing mode, press and hold the TALK button approximately three seconds until “Off”

appears on the display and the headset turns off.

Wearing ezTalker digital

ezTalker digital is designed to fit comfortably in your ear. The earhook

can be positioned to be worn on the right or left ear. The battery is

housed in the earhook, so the earhook must be connected to use the

headset.

To Place the Headset on Your Ear

1. Hook the earhook over the top of your ear, and place the speaker

in your ear with the tip of the headset angled toward your mouth.

To Change the Direction of the Earhook

1. Holding the stem of the earhook, gently pull the earhook from the

headset.

2. Insert the earhook into the hole on the opposite side of the headset.

For right ear

For left ear

Advertising