Transition Networks SISTM10XX-162-LR - Manual (Page 16)

11
3. Check the DIN-Rail is tightly on the track.
4. To remove the industrial switch from the track, reverse steps above.
Wall Mount Plate Mounting
Follow the below steps to mount the industrial switch with wall mount plate.
1. Remove the DIN-Rail from the industrial switch; loose the screws to remove the DIN-Rail.
2. Place the wall mount plate on the rear panel of the industrial switch.
3. Use the screws to screw the wall mount plate on the industrial switch.
4. Use the hook holes at the corners of the wall mount plate to hang the industrial switch on
the wall.
5. To remove the wall mount plate, reverse steps above.
Screwing the wall mount plate on the Industrial media converter