Technicolor - Thomson 42PB120S4 - Manual (Page 17)

Other functions
EN
17
Sleep timer
This function allows you to set an automatic shut-off time, from 0 to 4
hours, with 15-minute steps.
Press the red button on the remote control to activate the sleep timer
function.
A symbol appears on screen in front of the sleep time.
If no timer has been set, then -:-- is displayed. Use the buttons to
decrease/increase the duration.
Once the timer is set, pressing the red button displays the remaining time
before shut-off.You can use the
buttons to change the setting.
When the timer count down reaches 0, the TV goes automatically into
standby and the timer resets to -:--.
Zoom
The following formats are available using the buttons, in TV mode:
4/3: picture in centred 4:3 format.
zoom: picture in centred letterbox 16:9 format.
zoom ➐ ➐ : picture in 16:9 format with subtitles.
Cinerama: picture in widescreen 4:3 format.
16/9: picture in widescreen 16:9 format.
In PC mode, only 4/3 and 16/9 formats are available.
Customizing your TV set
You can set preferences for some features such as the language or
appearance of the menus.
Display the OVERVIEW menu using the MENU button. Select the
Preferences option and press OK to confirm.
The corresponding menu appears with the following options:
Eco mode: when this function is enabled,
In video mode: the set goes automatically into standby mode after 10
minutes without video.
In PC mode: the PC power management function will be activated.
Check the box using the
OK button to enable the functions.
This function is activated by default.
Menu language: select the language you want the menus to be displayed
in.The menu is immediately updated according to your selection.
Menu brightness: select a setting using the buttons.
AV1 input: use the buttons to select the type of video signal
transmitted by the equipment connected to the AV1 socket.
The Video option is selected by default.
Note: Select RGB if no picture is displayed when you connect equipment such as a
games console.
AV2 input: use the buttons to select the type of video signal
transmitted by the equipment connected to the AV2 socket.
The Video option is selected by default.
Press EXIT to close the menu. Select Return to return to the
OVERVIEW menu.
3 : 4 5
- : - -
PREFERENCES
Return
Eco mode
Menu language English
Menu brightness
AV1 input Video
AV2 input S-Video
42pb120S4-en 2/07/04 11:32 Page 17