Uniden Answering Machine - Manual (Page 14)

G E T T I N G S T A R T E D [ 14 ] www.uniden.com
When to Re-register Handsets
1) You’ll need to re-register the second handset (follow steps on page 13) each time the
digital security code is changed. Refer to page 41 for details regarding the Digital
Security Code.
2) When there is a power failure for more than one hour:
If power failure occurs (e.g. due to electrical storm or if the unit is unplugged during
a move), both handsets will need to be re-registered. To re-register, follow the same
registration process on page 13.
Call Transfer Feature
Conveniently, your cordless phone allows you to transfer outside calls from handset to
handset, simply by pressing the delete/transfer key. Not to worry, conversations will
not be interrupted; only one handset at a time can talk with an outside caller.
The second handset cannot go off hook to listen to conversations or make an outgoing
call while the other handset is in use.
To transfer a call (to the second handset)
1) Press the delete/transfer key during a call. The call will
automatically be placed on hold and the transfer tone sounds.
2) When the other handset receives the call, the transfer tone
stops. To cancel the transfer, press delete/transfer or talk/flash on the handset.
To receive a transfer call (from the second handset)
Pick up the handset (when AutoTalk is set to On), or pick up the
handset and press the talk/flash key to answer the transferred
call. Additionally, you can answer the transferred call by pressing
any number key, the
* /tone/ , or #/ key (when AutoTalk is set to On).
• If the second
handset’s battery
becomes very low,
the handset must be
recharged for 15-20
hours and re-registered
to the base unit.
• Make sure to return
the handsets to the
charging cradles after
each phone call.
• Call transfer allows
you to transfer outside
calls from handset to
handset, only one
handset at a time
can talk with an
outside caller.
• If you transfer the call
and it is not picked
up after 5 minutes,
the call will
be disconnected.
Hold
Transfer Call
Transfer Call