Uniden UH015sx - Manual (Page 25)

UNIDEN Model uh015sx UHF CB Radio
Reciever Selcall ID
24
Programming Your Selcall ID.
To programme your own receiver Selcall ID.
1. Press and hold then turn power on.
2. The initial display and status will appear on the screen (factory default is 00000).
3. When the key is pressed while in this condition , the last digit will
begin to flash.
4. Use or to select the digit position. The selected digit will flash.
5. Rotate the Channel Selector to change the active digit value.
6. When finished, press /ENTER to store . Three successive beeps are heard.
7. Press /ENTER for 2 seconds to exit. The radio returns to normal
operation.
-or-
Turn the Channel Selector to go to the next programmable parameter.
MENU
MENU
MENU
MENU
POL SCAN