Uniden BC 245XLT - Manual (Page 41)

4. Use the keypad to
enter a frequency for
the trunked system.
For example, enter
856.2625 (Type 1), or
enter a frequency of
the system you’re
going to track.
Note: To clear a mistake while entering a
frequency, press twice, and start over.
Then press .
If the frequency is out
of the range of the
system chosen in this
step, an error
message displays.
Press
and go back
to Step 3.
5. Press either or
to select the
next channel in
the bank.
6. Repeat steps 4 and 5
until all frequencies
have been entered.
7. Press to begin
searching the bank
you’ve programmed.
Then select the
programmed bank
using the keypad.
41
1 2 3 4 5 6 7 8 9 10 BANK
TRUNK
SCAN
C:\Manuals\BC245 VA\BC245 VA rev.vp
Fri Nov 12 10:32:11 1999
Color profile: Disabled
Composite Default screen