Uniden BC 245XLT - Manual (Page 52)

ID Scan Mode
1. Press to begin
scanning the lists you
have programmed.
If you haven’t
programmed any IDs,
SCAN displays but
your scanner cannot
stop on an active
conversation.
2. To remove a Scan
List from active
scanning, press the
number of the Scan
List on your keypad.
The Scan List
indicator turns off, and
the IDs in that list are
not scanned.
Note: One Scan List must always be active. If you
try and deactivate all the Scan Lists, Scan List 1
will automatically be active.
3. To restore a Scan List
to active scanning,
press its
number again.
4. Press to return to
Trunk Tracking
Search mode.
To alternate your
display between the
trunking repeater
indicators and the
Scan List indicators,
press .
52
C:\Manuals\BC245 VA\BC245 VA rev.vp
Fri Nov 12 10:32:23 1999
Color profile: Disabled
Composite Default screen