United States Stove Company 2007B - Manual (Page 6)

6
KEY DESCRIPTION PART NO. QTY.
1 Blower Motor 80442 1
2 Blower Housing Front 25090B 1
3 Blower Housing Back 25089B 1
4 Power Supply Cord 80232 1
5 Rheostat w/Nut and Knob 80090 1
6 Strain Relief Bushing 80109 1
N/S 10AB x 3/8 Hex Zinc Screw 83222 8
N/S #12 x 3/4 Teks Screw C23799 4
ASSEMBLY INSTRUCTIONS
step 1.
the bloWer assemblY must be DisConneCteD From the sourCe oF eleCtriCal
suPPlY beFore attemPtinG the installation.
With pliers, cut the 6 micro-joints and remove panel . Note: Discard the panel.
step 2.
Fix the assembly to the back of the stove with the four screws provided.
t he bloWer assemblY is intenDeD For use onlY With a stoVe that is marKeD
to inDiCate suCh use.
Do not route the suPPlY CorD near or aCross hot surFaCes!
BLOWER ASSEMBLY for Model 2007B