Uniden ENR1504 - Manual (Page 38)

75
HARDWARE, SOFTWARE, AND BOOTCODE VERSION
This information defines the version of your router. Record this
information in case you have to contact customer support.
SYSTEM UP TIME
This field displays how long the router has been operating since
it was last rebooted.
CURRENT TIME (SYSTEM TIME)
If Network Time Protocol or NTP is disabled, this field resets to
zero when the router is rebooted. If NTP is enabled, this field
displays the current time.
LAN STATUS
MAC Address This field displays the MAC address the
router uses to communicate with PCs
attached locally.
IP Address This field displays the IP address the
router uses to communicate with PCs
attached locally. The default IP address
is 192.168.1.1.
Subnet Mask This field displays the subnet mask
address the router uses to communicate
with PCs attached locally. The default
subnet mask is 255.255.255.0.
DHCP This field shows whether the router’s
DHCP server is enabled or disabled.
DHCP Start Address This field displays the first IP address (the
start of the range) available to the the
DHCP server.
DHCP End Address This field displays the last IP address (the
endt of the range) available to the the
DHCP server.
76
WAN STATUS
Default MAC Address This field displays the MAC address the
router uses to communicate with the ISP.
IP Address This field displays the IP address the
router uses to communicate with the ISP.
It also indicates whether the router is
obtaining an IP address automatically
from the ISP.
Subnet Mask This field displays the subnet mask the
router uses to communicate with the ISP.
Gateway This field displays the IP address of the
ISPs gateway.
DNS Server 1 This field displays the IP address of the
primary Domain Name System server the
rotuer uses to lookup URLs.
DNS Server 2 This field displays the IP address of the
secondary Domain Name System server
the rotuer uses to lookup URLs.
NTP SERVER
If the Network Time Protocol (NTP) is enabled, this field will
display the domain name or URL of the NTP server the router is
using to update its system clock.
TIME ZONE
This field displays the selected time zone the router is using to
maintain its system clock.
REFRESH
Click the Refresh button to update the System Information
screen.