Unitech ENTERPRISE PA500 - Manual (Page 36)

30
Copyright 2007 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Infrared Connection
Using infrared, you can enable short-range file exchange between your device and another IR-enabled
device.
To exchange files using IR connection:
1. Ensure that the IR function on both your MC35 and on other device you want to exchange files
with are turned on.
2. Switch to the program where you created the item you want to send and locate the item in the
list.
3. Align the IR port of your device with that of the IR-enabled device so that they are unobstructed
and within a close range.
4. Tap and hold the item, then tap Beam [type of item] on the pop-up menu.
5. Tap the device that you want to send the file to.
To receive files via IR connection:
1. Align the IR port of your device with that of the IR-enabled device so that they are unobstructed
and within a close range.
2. Have the owner of the other IR-enabled device send the file to you.
3. On the Receiving Data callout, tap Yes.
Bluetooth Connection
Your device allows you to connect to any Bluetooth-enabled device in your personal area network
(PAN). Once connected you can send and receive file to another Bluetooth-enabled device, locate and
use any of the services available on the Bluetooth-enabled device you are connected to.
To setup a Bluetooth connection:
1. Activate the Bluetooth function.
You have two options to activate your device’s Bluetooth connection using the Wireless
Manager or the Bluetooth option under the Settings
→ Connections preferences. Once
activated, Bluetooth connection is indicated as On in the Wireless Manager section of the Today
screen.
– To activate Bluetooth via the Wireless Manager, see “Using the Wireless Manager” on page
28.
– To activate Bluetooth using the Settings option:
a. Tap Start
→ Settings.
b. On the Connections tab, tap Bluetooth.