Unitech ENTERPRISE PA500 - Manual (Page 78)

72
Appendix B
FCC Statement
This is a FCC Part 15 Class B product. In a domestic environment this product may cause radio
interference, in which case the user may be required to take adequate measures.
Canadian Compliance Statement
This Class B Digital apparatus meets all requirements of the Canadian Interferance-Causing
Equipment Regulations.
The device is certified to the requirements of RSS-139-1 for 2.4 GHz spread spectrum devices.
European Conformity Statement
Declaration of Conformity with Regard to the R&TTE 1999/5/EC and EMC89/336/ EEC directives.
Laser Information
The unitech PA500 series is certified in the U.S. to conform to the requirements of DHHS/CDRH 21CFR
Subchapter J and to the requirements of IEC 825-1. Class II and Class 2products are not considered to
be hazardous. The PA500 series contains internally a Visible Laser Diode (VLD) whose emissions do
not exceed the maximum limits as set forth in the above regulations. The scanner is designed so that
there is no human access to harmful laser light during normal operation, user maintenance or during
prescribed service operations.The laser safety warning label required by the DHHS/IEC for the PA500
series’s optional laser scanner module is located on the memory compartment cover, on the back of the
unit.
CAUTION! Use of controls or adjustments or performance of procedures other than those specified
herein may result in hazardous laser light. Use of optical instruments with the scanner will increase eye
hazard. Optical instruments include binolulars, microscopes, and magnifying glasses. This does not
include eye glasses worn by the user.
Regulatory Compliance Statements