Unitech PA950 - Manual (Page 189)

21-189
Making Your Device Discoverable
1. Tap > Settings > Connections tab.
2. Tap Bluetooth.
3. Select Discoverable.
Other Bluetooth devices can now detect your device and attempt to
beam information to it, establish a bond, or use a Bluetooth service.
Note that to receive beamed information, you must accept it on your
device.
Selecting Discoverable also turns on your Bluetooth radio.
If you no longer want your device to be discoverable, tap Off to
turn off the radio or On to leave the radio on, but not allow
detection by other devices.
See Also: About Bluetooth Modes
Turning On and Off Bluetooth
Beaming Information with Bluetooth
1. Tap and hold an item to beam, such as an appointment in Calendar,
a task in Tasks, a contact card in Contacts, or a file in File Manager.
2. Tap Beam [type of item].
3. Tap the device to which you want to send the beam.
The item is beamed to the device you selected.
If the device that you want to beam to doesn't appear in the list,
make sure that it is turned on, in discoverable mode, and within 10
meters (30 feet) of your device. Also, make sure that your
Bluetooth radio is turned on.