Uniden MHS135DSC - Manual (Page 30)

E-26 Uniden MHS135DSC Radio Owner’s Manual
1. Press and hold MENU/CALL to display the Call menu.
2. Select Standby to place your radio in standby mode.
3. To cancel standby and return to the mode your radio was in, press any button.
DisaBling aUtOMatiC Channel sWitChing
If you are involved in a bridge-to-bridge call, you may not want the radio to
automatically switch channels when it receives a DSC call. In cases like this, you can
disable automatic channel switching. If you receive an individual call, the radio will
respond with an unattended code, just as if the radio were in Standby.
1. Press and hold MENU/CALL to display the Call menu.
2. Select DCS Setup, then Auto CH SW.
3. Select Off and press
ENTER-H/M/L . The radio will not automatically switch
channels until you reactivate this feature.
# nOte: Use this feature with caution. Deactivating automatic switching and then
forgetting it can make it hard for you to receive DsC calls.
If you have unread incoming DSC calls, the radio displays a message icon. You will be
able to review who has called. The radio displays the last 10 distress calls and the last
50 non-distress calls it received (see page E-21).
gPs FeatUres
gPs OPeratiOn OVerVieW
Your GPS system provides more than just your specific location.The GPS Favorites
menus let you create a directory of favorite places and their coordinates so you can
easily return there. Using the GPS Setup menus, you can determine power-saving
options, measurement increments, and time settings
The radio is factory-preset to search for your geographic location when it is turned on
for the first time. You can also use GPS menus to set up specific parameters for your
GPS system.
FAvorITES MenU
The Favorites menu is comprised of the Goto menu and the Add menu. The Goto menu
adds (saves) the current GPS position as well as recalls that position and others you
have saved to sail back to it.
16
USA
Auto CH SW
On
Off
Back
[MENU]
Exit
[CLR]
Select
[ENT]
Press and hold
DSC Setup
Auto CH SW