Unibrain iZak - Manual (Page 23)

iZak™ User Guide
Remote Control Keys
iZak™’s Remote Control has a full set of buttons in order to provide to the user complete
control of the device. In the next paragraphs is described the functionality of some important
buttons, while in the sequent table, there is a list of all keys and their functionality in brief.
VIDEO OUTPUT
This key toggles video out format. You can
switch between the individual video outputs
pressing this button. The video output selected
at any time will be shown on the screen. If you
cannot see correct image on the TV or VGA
screen, press this button until the image
appears. In the adjacent image you see that
the current video configuration is NTSC for
C/S-Video signal. The video indication banner
appears for few seconds each time you press
the VIDEO OUTPUT button and also each time
you switch on iZak™.
Toggling VIDEO OUTPUT does not save the video settings. To do so, select the “Video
Settings” from the Settings menu.
INFO, 0, 1, 2, RETURN
To return to factory default settings, press consecutively the above keys.
!
SUBTITLE
"
Pressing this key you can position the
external subtitles of DivX movies. A
dual set of white template lines appear
which you can position using the !, "
keys. Press the Subtitle button again
when finished positioning.
THUMBNAILS
Pressing this key you can toggle (on/off) the image preview of your pictures.
23