Unibrain iZak - Manual (Page 29)

iZak™ User Guide
Video Settings
These settings configure the provided
Video Outputs Format:
• NTSC
Composite/S-Video
• PAL Composite/S-Video
• NTSC Component
• PAL Component
• NTSC SCART
• PAL SCART
• High Definition TV at 480
• High Definition TV at 720
• High Definition TV at 1020
• VGA (at 1024x768)
Use the ▲▼ navigation buttons to select your favorite Video setting. Press PLAY/ENTER
button to activate. Press the HOME button of the remote to save the settings. Once
activated, the video out will switch to the selected format. Please notice that you should
have already connected the correct cable, before configuring the video settings.
Otherwise it is probable to display garbage in the TV monitor. For example, before
enabling the “NTSC SCART” option you should have already connected the SCART
cable.
In case of any settings errors (e.g. the simple Composite AV cable is connected and
you setup NTSC Component, so no display on the TV), press repeatedly the “VIDEO
OUTPUT” key of the remote control up to the moment you see the correct display. You
can then choose the right Video via “setting” and save it via the HOME button.
TV Type
Select one of the listed types of TV
display physical aspect rations.
Press the HOME button of the remote to
save the settings.
29