Uniden LRD 737 - Manual (Page 18)

Operation
You are now ready to enjoy the convenience and security of your
LRD 737. Please read this section of the Operating Guide carefully to
familiarize yourself with the basic operation of this unit.
Power On
Turn the volume control to switch on the power. When you power up the
LRD 737, it performs a self-test of all its circuits. This test takes several
seconds, during which you will hear the different alarm tones and see all
the LEDs. First, you will hear the X-band alarm while the (R)adar,
(P)ower and signal strength LEDs light. It is best to adjust the audible
alarm during the self-test. Next you’ll hear the K-band,
Ka-SuperWideband, Laser, S.W.S., and Laser 2 alarms, each for 1
second, while the (C)ity, (M)ute, (L)aser, S.W.S. and (L)aser (2) LEDs
light. (The power LED remains on until you turn off the unit.) When
turned on, the LRD737 always returns to its last setting.
After the LRD 737 confirms proper operation, the alert tones and all
LEDs, except the green Power LED, turn off. If the Power LED does not
light, check the cigarette lighter socket connection. If the unit turns on
and off intermittently, or the alert tone sounds too often for no reason,
check the power cord connection at both ends to be sure it is not loose.
Volume Control
Adjust the volume control to
a comfortable alarm tone
level for your vehicle. The
volume level does not have
any effect on the unit’s
sensitivity.
13
C:\Manuals\LRD737\LRD737.vp
Wed Sep 22 15:35:40 1999
Color profile: Disabled
Composite Default screen