Uniden LRD 737 - Manual (Page 19)

Memory Retention Feature
The Memory Retention Feature retains the LRD737’s operational settings
in memory for at least 2 days without power. When you turn on the
LRD737, it will be in the same mode as when you turned it off.
Full Warning
When the LRD 737 detects a radar, laser, or safety warning signal, it
emits a distinct warning tone and the corresponding alert LEDs
(
R, L/L2, or SWS ) will light and blink. The blink rate of the LEDs increases
and the signal strength meter LEDs light successively as the signal source
comes closer.
Audio Alert Only Operation
Press the audio button for Audio Alert Only operation.
When Audio Alert Only is selected, the visual alert and signal strength
meter are disabled. In this mode, all lighted LEDs will dim. Press the
audio button again for the Full Alert (audio and visual) Mode.
(Do not set the volume control at minimum when in Audio Alert Only
because there will be no alert.)
Note: The audio alert tones for the 3 radar bands, 2 laser systems and
Safety Warning System are all different.
14
C:\Manuals\LRD737\LRD737.vp
Wed Sep 22 15:35:41 1999
Color profile: Disabled
Composite Default screen