Uniden TITANIUM 24-148 - Manual (Page 15)

G E T T I N G S TA R T E D [ 13 ]
GETTING ST
ARTED
Entering Your Area Code
If you enter a 3-digit area code number in th e “ Area Code “ option, your local
area code does not appear in Caller ID messages. Do not program this option, if
your calling area requires 10-digit dialing.
When reviewing Caller ID messages, you will see only the local seven digit
number. For calls received from outside your local area code, you will see a full
10-digit number.
1 1 When the phone is in the standby mode, press .
The Caller ID setting screen appears.
2 2 Press to select “ Area Code “ or press .
3 3 Press .
4 4 Use the number keypad ( to ) to enter the 3-digit area code.
5 5 Press . A tone sounds and the displayed area code is entered.
6 6 Press to complete the setting or return the handset to the base. The
handset returns to the standby mode.
ª
If your calling area
requires 10-digit dialing,
do not program this
option.
When the area code has already been stored in memory, the stored
area code will be displayed. To change it, use the
and number
keypad to enter the new area code. Then press .
To complete the setting, press or return the handset to the
base unit.
UC772EZ ENG(24-148) 10/9/01 15:24 Page 13