Universal Remote Control (URS) Easy Clicker UR3L-SR4 - Manual (Page 8)

6
G. G. Erasing All Lear Erasing All Lear ned Commands fr ned Commands fr om om
One Component One Component
STEP1 Press the [COMPONENT] and [INPUT] buttons simul-
taneously for 3 seconds until the Component LED
light turns on.
STEP2 Press and hold both the [COMPONENT] button you
want to erase and the [PAUSE] button for 5 seconds.
The Component LED will blink twice to confirm the
erasure.
STEP3 To exit, press and hold both the [COMPONENT] and
[INPUT] buttons simultaneously until the Component
LED blinks 3 times.
H. Pr H. Pr ogramming the All Of ogramming the All Of f Button f Button
This allows you to program the All Off button so it can send up
to three power On/Off commands with one button press.
STEP1 Press the [CBL] button.
STEP2 Press the [All OFF] button and the [OK/SEL] button
simultaneously for 3 seconds. The [CBL] button will
turn on for 30 seconds.
STEP3 Press the first [COMPONENT] button you want to
store in the [ALL OFF] button and then the [POWER]
button. Repeat this for other Components until you
have stored all the desired power commands into the
[ALL OFF] button.
STEP4 Press the [CH+] button to save the power commands
you stored. The [CBL] button will blink twice to con-
firm the commands have been saved.
I. Pr I. Pr ogramming for Advanced Functions. ogramming for Advanced Functions.
If your remote model has custom-programmable Macro but-
tons available, they can be programmed to act as a ‘Macro’ or
Favorite Channel button in CABLE mode. This allows you to pro-
gram up to five 2-digit channels, four 3-digit channels or three 4-
digit channels that can be accessed With one button press.