Uncle Milton Industries Space Image Projector - Manual (Page 2)

Instruction Manual
3
Important Safety Instructions
SAVE THESE INSTRUCTIONS
Caution–Please read all instructions carefully before operating.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer's
instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A grounding type plug has two blades and a
third grounding prong. The wide blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Unplug this apparatus during lightning storms or when unused for long periods of time.
13. Refer all servicing to qualified service personnel. Servicing or replacement is required when
the apparatus has been damaged in any way, such as power-supply cord or plug is damaged,
liquid has been spilled or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been dropped.
14. Damage requiring service or replacement: Unplug the product from the wall outlet and refer
servicing to Uncle Milton Industries under the following conditions:
A. When the power-supply cord or plug is damaged,
B. If liquid has been spilled, or objects have fallen into the apparatus,
C. If the apparatus has been exposed to rain or water,
D. If the apparatus does not operate normally by following the operating instructions. Adjust
only those controls that are covered by the operating instructions, as an improper
adjustment of other controls may result in damage and will often require extensive work
by a qualified technician to restore the apparatus to its normal operation,
E. If the apparatus has been dropped or damaged in any way, and
F. When the apparatus exhibits a distinct change in performance.
Care: Occasionally dust the unit with a soft cloth. For stubborn stains, use a soft cloth dampened
with a weak solution of mild detergent and water. Dry the unit immediately afterwards with a
clean cloth. Don't use abrasive cloths, thinners, alcohol, or other chemical solvents, because they
may damage the finish or remove the panel lettering.
CAUTION-ELECTRIC TOY:
Not recommended for children under 8 years of age.
As with all electrical products, precautions should
be observed during handling and use to prevent
electric shock.
ADULT SUPERVISION RECOMMENDED WITH ALL ELECTRICAL TOYS
OPERATING AT 120 VOLTS. THE TOY SHOULD BE PERIODICALLY
EXAMINED FOR POTENTIAL UNSAFE CONDITIONS SUCH AS: DAMAGED
CORD, PLUG, HOUSING OR PARTS. IN THE EVENT THAT SUCH DAMAGE
IS FOUND, THE TOY SHOULD NO BE USED UNTIL PROPERLY REPAIRED.
DEAR PARENT - While every precaution has been taken in the
manufacturing of this product, we recommend that the product be
periodically examined for potential hazards and that any potentially
hazardous parts be repaired or replaced.
Input 120 VOLTS AC, 60 Hz. Output 6 VOLTS DC, 450 mA
Time and Space Image Projector