Uncle Milton Industries Space Image Projector - Manual (Page 4)

Instruction Manual
6 7
Minute – Press DATE/TIME SET button again (minute will flash on LCD screen). Press [ ]
“UP” ADJUSTMENT button or [ ] “DOWN” ADJUSTMENT button until correct minute
appears on LCD screen.
2. Press DATE/TIME SET button again to exit the date/time set mode and return to normal
mode.
If you do not manually exit date/time set mode and return to normal mode within 30
seconds, clock will do so automatically.
Once entering date/time set mode (year flashes), you can push DATE/TIME SET button to
toggle through to the date or time element you want to re-set.
Press [ ] “UP” ADJUSTMENT button to select standard (12-hr) or military (24-hr) time.
LCD Backlight
Push SNOOZE button to turn on backlight. Backlight will automatically turn off after a few
seconds.
Setting the alarm
1. Press the ALARM SET button to enter alarm set mode. “AL” will appear under “DAY” on LCD
screen.
2. Press and hold ALARM SET button until a dash flashes under “MONTH” on LCD screen (do not
set a month).
Hour – Press ALARM SET button twice; do not set a month or date (hour will flash on LCD
screen). Press [ ] “UP” ADJUSTMENT button or [ ] “DOWN” ADJUSTMENT button until
desired hour appears on LCD screen.
Be sure to set hour for desired AM or PM time as shown on LCD screen.
Minute – Press ALARM SET button again (minute will flash on LCD screen). Press [ ] “UP”
ADJUSTMENT button or [ ] “DOWN” ADJUSTMENT button until desired minute appears on
LCD screen.
If month and date are set while in alarm set mode, alarm will function only on that particular
month and date.
3. Press DATE/TIME SET button to exit alarm set mode.
Selecting the alarm sound
Use the ALARM SOUNDS SELECTOR to choose from four “space sounds”: BEEP , TRANSPORT,
BEACON or ANALYZE.
Using the alarm
Alarm on – Press [ ] ALARM ON/OFF button so that alarm-on indicator appears on LCD
screen. Alarm is now enabled and will sound at desired time.
Snooze – You can press SNOOZE button for a few minutes of extra sleep when alarm sounds.
Alarm will automatically sound again after 5 minutes.
Alarm off – Press [ ] ALARM ON/OFF button again so that alarm-on indicator disappears on
LCD screen. Alarm is now disabled and will not sound.
Alarm reset – Press [ ] ALARM ON/OFF button again so that alarm-on indicator reappears
on LCD screen. Alarm is enabled again and will sound at desired time.
If alarm is not manually turned off when it sounds, it will automatically turn off in 15 minutes
and reset itself.
Using the projector
Swivel the PROJECTOR to desired angle for ceiling or wall projection. You can project the time
superimposed over one of three space images, or you can project just the time or a space image
individually. Projection works best in a darkened room.
Projecting the time
1. Press TIME PROJECTION ON/OFF button to turn on time projector.
2. Turn the TIME FOCUS KNOB to adjust the time projection focus.
Projecting a space image
1. Press IMAGE PROJECTION ON/OFF button to turn on image projector.
2. Turn the IMAGE SELECTOR DIAL to choose from three space images: THE MOON, STARFIELD
or SATURN.
3. Turn the IMAGE FOCUS KNOB to adjust the image projection focus.
When AC adapter is used, time and/or image will continuously project until manually turned
off. If AC adapter is not used (batteries only), time and/or image projector will turn off
automatically in 10 minutes.
Time and Space Image Projector