Uniden XSA965 - Manual (Page 41)

The status light won’t
illuminatewhenthe handset
is placed on the base.
• Make sure the AC adaptor is plugged into the base and wall outlet
Make sure the handset is properly seated in the base.
Make sure the charging contacts on the handset and base are clean.
•
•
TROUBLESHOOTING
TROUBLESHOOTING
TROUBLESHOOTING
Can’t makeor receive calls. • Checkbothendsof the telephoneline cordare pluggedin firmly.
• Makesurethe AC adaptoris pluggedinto the baseand wall outlet.
• Disconnect the AC adaptor for a few minutes, then reconnect it.
• Makesurethat you are not too far fromthe base.
• Chargethe handset.
The handset doesn't ring or
receive a page.
• The battery pack may beweak.Chargethe battery for 20-25hours.
• The handset may betoo far away fromthe baseunit.
• Place the baseunit away from appliances or metalobjects.
Page 33
If you still have a problem. Australia: www.uniden.com.au New Zealand: www.uniden.co.nz
Handset number 1 or
number 2 not working
(XSA965 only)
• Place one handset at a time on the main base for 5 seconds each.
The audiosounds weak
and/ or scratchy.
•
•
•
Move the handset and/or base to a different location away from
metal objects or appliances and try again.
Press /channel while on a call to change the
operating channel.
Make sure that you are not too far away from the base.
Press /channel while on a call to change the
operating channel.
XSA955 only -
XSA965 only - •