Wine stocking recommendations – U-Line 2175DWRWC User Manual

Page 9

Advertising
background image

2175DWRWC

9

Wine Stocking Recommendations

Specially designed wine racks allow for the proper
horizontal storage of wine. The bottles are properly
positioned so that the wine remains in contact with the
cork to assure that the cork does not become dry.

Cascading Wine Racks

The U-Line Wine Captain drawers are equipped with a
proprietary mechanism that allows the wine racks to
automatically cascade outward as each drawer is opened.
This feature provides bottle presentation upon opening,
maximizes access to the bottles and enables easy
identification of the bottles/labels.

• Open the drawers of the Wine Captain with a slow and

steady motion. The interior racks in the drawers will
cascade toward you.

NOTE: By design, if either drawer is abruptly opened, the
cascading mechanism will disengage and the racks will
NOT automatically cascade outward but will remain in the
cabinet. However, because the racks slide manually, you
can still easily access the wine.

• Close the drawer slowly, and the cascading racks will be

pushed back into their retracted position.

NOTE: If the cascade mechanism disengages because of
an abrupt opening, it will automatically re-engage as the
drawer is closed, and operate normally the next time the
drawer is opened.

Stock your unit as follows:

Figure 7

1. The bottom drawer should be stocked first. Open the

drawer, and beginning at the back of the lowest rack
work forward, staggering the bottles as shown
(Figure 7).

2. Stock the second rack in the same manner.

3. Close the drawer slowly.

Figure 8

4. Repeat Steps 1 to 3 to stock the racks in the upper

drawer (Figure 8).

The cascade mechanisms can be easily removed if desired
(See MAINTENANCE: DISABLING THE CASCADE FEATURE).

Wine Caddy

Figure 9

The bottom drawer includes a three bottle caddy
(Figure 9)
for elegant transportation and wine service.

To access and remove the bottle caddy:

1. Open the bottom drawer fully and grasp the caddy

handle from either side.

2. While supporting the bottom of the caddy with one

hand, slowly and gently pull it out from under the
drawer.

3. Close the drawer completely.

To replace the bottle caddy:

1. Open the bottom drawer fully.

2. Support the bottom of the caddy with one hand while

picking up the caddy. Gently slide the caddy into place
under the drawer.

3. Ensure that the caddy is centered, and close the drawer

completely.

ULIN_0243_A

ULIN_0242_A

ULIN_0050_A

Advertising