Ultra electronic Magicard Latin Series User Manual

How to use these instructions

Advertising
background image

3506/07/01 Issue 1 LATIN SERIES DCR No. 26759
PRINTHEAD INSTALLATION & COMMISIONING

MAGICARD LATIN SERIES PRINTER

INSTRUCTIONS FOR REPLACEMENT OF THE

PRINTHEAD

ASSEMBLY




CAUTION
– The following procedures involve contact with Electrostatic
Sensitive Devices. All precautions for handling Electrostatic Sensitive Devices
should be followed at all times, including the use of a grounded wrist strap.



HOW TO USE THESE

INSTRUCTIONS




Your replacement printhead is despatched to you fully set up in the factory.
All you are required to do is:

1. Physically replace the printhead
2. Adjust the Printhead density setting in the Magicard Support Tools.

to the figure given on the enclosed test card.

Full instruction to carry out both of these tasks are given in the following text:












Advertising