Universal Electronics URC 7800 - Manual (Page 10)

Satellite Receiver Brand: ____________________
The brands are listed in alphabetical order with the most pop-
ular codes listed first. You will use one of these codes to pro-
gram your Cinema 7+™ to operate your Cable Converter or
Satellite Receiver as follows:
1. Turn on your Cable Converter or Satellite Receiver.
2. Press CBL/SAT and release. Press and hold SETUP
until the Cinema 7+™’s red light blinks twice, then
release SETUP.
3. Enter the first four-digit Cable Converter or Satellite
Receiver code listed. If you perform this procedure
correctly, the red light will blink twice when you enter
the final digit of your code.
4. Aim the Cinema 7+™ at your Cable Converter or
Satellite Receiver and press POWER. Your Cable
Converter or Satellite Receiver should turn off. If it
does not respond, repeat steps 2-4, trying each
code listed for your brand until you find the one that
operates your Cable Converter or Satellite Receiver.
NOTE: If you have tried all the codes listed for your
brand and your Cable Converter or Sateliite
Receiver does not respond, try using the search
method found on page 22.
5. Your Cinema 7+™ is now programmed to operate
your Cable Converter or Satellite Receiver. Write
your Cable Converter or Satellite Receiver code in
the boxes to the left for future reference.
Remember, if you want to use your Cinema 7+™ to operate
your Cable Converter or Satellite Receiver, press the
CBL/SAT key first.
Setup Codes for Cable Converters
ABC 0003, 0008, 0014, 0007, 0001, 0011, 0013, 0017
Allegro 0153, 0315
Gantronix 0022, 0207
Archer 0797, 0153, 0022, 0207
Belcor 0056
Cable Star 0056
Cabletenna 0022
Cableview 0022
Century 0153
Citizen 0153, 0315
Colour Voice 0031
Comtronics 0040
Contec 0019
Digi 0637
Eastern 0002
Emerson 0797
Everquest 0015, 0040
Focus 0400
Garrard 0153
GC Electronics 0056, 0207
Gemini 0015
General
Instrument 0476, 0003, 0014, 0011, 0276, 0810
Goldstar 0144, 0040
Goodmind 0797
Hamlin 0259, 0009, 0020, 0034
Hitachi 0011
19 18
Web Site : http://www.oneforall.com Web Site : http://www.oneforall.com
boxes to the left for future reference.
Remember, if you want to use your Cinema 7+™ to operate
your CD Player, press the CD key first.
Setup Codes For CD Players
Aiwa 0124, 0157
Bang & Olfusen 0212
Burmester
0420
California Audio
Lab 0029
Carver 0157, 0179, 0437
Denon 0003, 0873
DKK 0000
Emerson 0305
Fisher 0174, 0179
Garrard 0393, 0420
Genexxa 0032, 0305
Harman/Kardon 0173
Hitachi
0032
H/K 0157
JVC 0072
Kenwood 0028, 0037, 0190, 0826, 0681
Krell 0157
Linn 0157
LXI 0305
Magnavox 0157, 0305
Magnavox CD-R 0626
Marantz
0029, 0157, 0180
MCS 0029
Mission 0157
MTC 0420
Nikko 0174
NSM 0157
Onkyo 0101, 0868
Optimus 0000, 0032, 0037, 0145, 0179, 0305, 0420, 0437, 0468
Panasonic 0029
Philips 0157, 0626
Pioneer 0032, 0468, 0244, 0305
Proton 0157
QED 0157
Quasar 0029
RCA 0764, 0053, 0179, 0305
Realistic 0179, 0180, 0420
Rotel 0157, 0420
SAE 0157
Sansui 0157, 0305
Sanyo 0179
Scott 0305
Sears 0305
Sharp 0037, 0180, 0861
Sherwood 0180
Sony 0000, 0185, 0490, 0604, 0605
Soundesign 0145
Tascam 0420
TEAC 0174, 0180, 0393, 0420
Technics 0029
Victor 0072
Wards 0157, 0053
Yamaha 0036, 0187
Yorx 0461
Programming the Cinema 7+™ to operate your Cable
Converter or Satellite Receiver:
Locate the brand name of your Cable Converter or Satellite
Receiver in the “Setup Codes for Cable Converters” or “Setup
Codes for Satellite Receivers” section (starting on the next
page), and write it in either space below.
Cable Converter Brand: ________________________________________________________
or