Uniden DCT738 - Manual (Page 26)

25
If.you.select.ALL.MEMORY,.ARE.YOU.SURE?.appears.on.the.display.screen..Move.the.cursor.to.select.YES,.
and.then.press.[select/
].
If you select ONE MEMORY, find the phonebook entry you want to transfer and then press [select/ ].
The.phonebook.entries.will.be.transferred.to.the.designated.handset..During.the.copy.process,.the.receiving.
handset.shows.RECEIVING.and.the.banner.of.the.sending.handset.
When.the.transfer.is.completed,.DONE!.appears.on.the.handset.
Note: If your phonebook contains 100 entries, you cannot store any new phonebook entries. You will
hear a beep, and MEMORY FULL appears on the display. If the selected handset is out of range or
data transfer is canceled, UNAVAILABLE appears in the display. Phonebook listings will not be
transferred.
Customizing Your Phone
Changing the Handset Banner
Each.handset.will.display.a.banner.name.once.it.is.registered.to.the.base..The.default.banner.is.Handset.#,.
Handset.#2,.etc..You.can.change.the.name.your.phone.displays.by.changing.the.banner.display..If.you.have.more.
than one handset, the banner name identifies your handset during handset-to-handset functions like intercom and
DirectLink™.communication..The.name.will.be.displayed.on.the.LCD.screen.during.Standby,.Intercom,.Intercom.
Hold,.Room/Baby.Monitor,.and.Copy.Phonebook.operations..The.banner.name.will.be.displayed.on.the.receiving.
handset.as.well.
Press.[menu/clear].
Select.the.HANDSET.SETUP.menu,.and.then.the.BANNER.submenu.
Use.the.keypad..to.enter.or.edit.the.banner.name..(See.Entering Text from
Your Handset.on.page..for.detailed.instructions.on.entering.text.)
Press.[select/ ]
. You will hear a confirmation tone.
5.
6.
7.
8.
.
2.
3.
4.