Uniden DCT738 - Manual (Page 53)

52
Press.[select/ ].when.the.system.is.answering..If.another.handset.is.screening.a.call,.you.will.hear.a.beep.
and.you.will.not.be.able.to.screen.the.call.
To.answer.the.call,.press.[
/flash].
To.stop.screening.the.call,.press.[ ].
Recording a Conversation
You.can.record.a.conversation.between.two.seconds.and.ten.minutes.long.from.the.handset.or.the.base..These.
recorded.conversations.are.treated.just.like.regular.messages..When.the.answering.system.is.full,.FL.will.appear.on.
the.base.LCD.and.recording.will.be.terminated..You.can.not.record.three-way.calls.or.intercom.conversations.
From the base From the handset
Starting a
recording
During.a.conversation,.press.and.hold.
[memo/call rec]..
The message counter LED flashes
“- -”. A confirmation tone that can be
heard.by.both.parties.sounds.during.
recording.
.
2.
During.a.conversation,.press.[menu/
clear].
Move the cursor to select CALL
RECORD, and then press [select/
].
RECORDING.A.CALL.appears.on.the.
display. A confirmation tone that can be
heard.by.both.parties.sounds.during.
recording.
.
2.
3.
Stopping a
recording
Press.[memo/call rec] or.[ ].
You will hear a confirmation tone,
and.the.message.counter.LED.stops.
flashing.
.
2.
Press.[menu/clear]..
Move.the.cursor.to.select.CALL.
RECORD,.and.then.press.[select/
].
STOP.RECORDING.appears.on.the.
display, and you hear a confirmation
tone..
.
2.
3.
Note: Every state has different regulations governing the recording of conversations over the
telephone. Make sure to check your local, state and federal laws before using this product to record
any telephone conversation in order to determine that your use is in compliance with such laws or
guidelines.
•
•
•