Univex OHDADJ - Manual (Page 5)

5
3/8 X 2-1/4” 17
STEP 2:
FIGURE 2
• SECURELY assemble two 2” OD WHEELS (13) to the REAR BENCH SUPPORT (7) using two 3/8 X 2” BOLTS (16), four 3/8” INT
TOOTH LOCK WASHERS (24) and two 3/8” LOCK NUTS (27) as shown in FIGURE 2. (NOTE: Do not over tighten this connection,
wheels should rotate smoothly.)
• SECURELY assemble two 2” OD WHEELS (13) to the FRONT BENCH SUPPORT (8) using two 3/8 X 2-1/4” BOLTS (17), four 3/8” INT
TOOTH LOCK (24) and two 3/8” LOCK NUTS (27) as shown in FIGURE 2. (NOTE: Do not over tighten this connection, wheels should
rotate smoothly.)
16 3/8 X 2”
8
7
27
24
13