Ultratec 50DX20B - Manual (Page 16)

16
AUDIO SYSTEM SETUP
Match the numbers below to the diagram for speaker placement and refer to the table for the different surround sound requirements.
ቢ
The television’s internal speakers.
ᕄ
These speakers are connected to a separate audio amplifier. Use the “AUDIO TO HI-FI” output on the TV.
ᕅ
These speakers are connected to the REAR SPEAKER 8 Ohm output on the TV.
SURROUND SURROUND REQUIRED OPTIONAL EFFECT
FEATURE SWITCH* CONNECTION CONNECTION
OFF SP. MATRIX
ᕃ ᕄ
Receive Mono and Stereo sound
SURROUND
MATRIX SP.MATRIX
ᕃ ᕅ ᕄ
Receive Movie Theater-like sound
SURROUND
EXTERNAL EXT. ᕄ ᕅ This feature turns off the TV’s
SPEAKERS internal speakers.
* See page 9 for location of SP. MATRIX SURROUND Switch.