Directly selecting a channel, Listening to am/fm/tv channels, Using the alarm clock – Uniden UBC340CRS User Manual
Page 19
Advertising
8
Listening to AM/FM/TV Channels
Listening to AM/FM/TV Channels
To listen to AM/FM/TV channels, slide the
mode selector to
AM/FM. Then, press the
button at the top of the scanner to select
the desired source (AM for AM Broadcast,
FM or FM for FM or TV Broadcast).
Directly Selecting a Channel
Press
SVC/DIR to select the direct entry
mode. Use the s
/t buttons to step through
the selected band. The scanner stops on
active channels. TV channels are scanned
after FM channels in FM mode.
You can also enter the channel frequency
using the keypad, enter the channel
frequency (for FM or AM) or the TV channel
number and press
E/PGM .
Using the Alarm Clock
UBC40CRS OM.indd 8
7/5/08 4:8:7 PM
Advertising