Unitech PA600 - Manual (Page 12)

4
Copyright 2006 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
A Tour of the PA600
The following sections describe the main components and features of the PA600.
Front Left View
No. Component Description
1. Status indicator Indicates the battery charging and barcode scanning status.
Green - Battery is fully charged or barcode
scanning process is completed without error.
Red - Battery is charging, barcode scanner is fired /
activated.
2. Left scanner
trigger button Press to activate the barcode laser scanner.
3. Power button If the device is off, press this button to turn it on.
Alternatively, when the unit is on, this key must be
pressed and held down for about three seconds in
order to turn the device off.
4. Microphone Enables you to record voice audio.
5. Universal
connector Connects your device to a USB charging/communication cable.
This USB cable connects to the computer’s USB port and accepts
the 5V AC adapter to provide power to the PA600. See page16 for
further instructions. The unit can simultaneously recharge and
perform an Activesync operation. You can also use it to connect
peripheral hardware, such as a docking station, to your device.
This port can also support USB and RS232 hosting for devices
such as a USB or RS232 scanner, keyboard, or USB memory
key.
6. Keypad Keypad interface for controlling the PA600. See Keypads
and Function Buttons on page 14 for more information.
7. LCD touch screen Displays the applications and data stored on your device. It
is touch-sensitive and responds to the stylus or finger.
8. Speaker Enables you to hear audio from the PA600.
1
2
4
3
5
6
7
8