Unitech PA600 - Manual (Page 19)

Chapter 1
11
Turning the PA600 on for the First Time
After you have initially charged your device for about 16 hours, the device is ready to
be used. You can now start up your device where you’ll calibrate the display, learn
some basic stylus usage, and set up the system time zone, date and time.
Powering On
1. Turn on your device by pressing
the power button on the front panel.
NOTE:
The PA600 screen ships
with a protective plastic film.
You may remove this if
desired by peeling from one
corner. The screen will be
more susceptible to scratch-
ing without the film, but will
be more readable.
2. The unitech PA600 welcome
screen appears for a moment fol-
lowed by the Windows CE screen.
Power Button