Set delay time, Set attenuator, Set record – Uniden BCD996T User Manual
Page 98: Assigning a search range to a search key
98
Set Delay Time
Choose a delay time to set how long the scanner stays on a transmission after it
ends.
to select a value from 1 sec, 2 sec, 3 sec, 4 sec, 5 sec, and Off.
F
Set Attenuator
Choose to attenuate all frequencies by about 20 dB.
to select to choose an attenuation for all frequencies in the range.
F
On — the frequencies are attenuated.
Off — the frequencies are not attenuated.
Set Record
to enable real time audio output from REC to an audio recording device.
On — the scanner outputs the signal. Then press
F
to select.
Off — the scanner does not output any audio. Then press
F
to select.
Assigning a Search Range to a Search Key
You can assign any of the Service or Custom Searches to the six Search keys for
quick access to your favorite searches.
[MENU]
Search for ...
F
Set Search Key
F
Select the key to assign
F
Select a search range
F
[MENU]
Search for ...
F
Now, to access that search, hold on any channel, then press
F
and the number
key [1] to [6] corresponding to the search range.
The default settings are:
SRCH 1: Custom 1
SRCH 2: Public Safety
SRCH 3: Railroad
SRCH 4: FRS/GMRS
SRCH 5: TV Broadcast
SRCH 6: FM Broadcast