Ultimate Technology 600 POS - Manual (Page 25)

Series 600 POS Keyboard
20
Table 2. Local Mode Programming Instructions
* = Default Settings
Function Code(s) Operation Normal Indication Remarks
22 or 32
Main Port 0 (22)
AUX Port 1 (32)
Parity
1. Swipe Program Card. While in programming mode, at the Series 600 Keyboard
numeric keypad, enter Function Code 22 (Port 0) or 32 (Port 1).
LED (2) turns on.
2. At Series 600 Keyboard numeric keypad, enter the applicable number (0, 1 or 2) to
select type of parity per list below.
0 = none*
1 = odd
2 = even
LED (2) turns off.
3. Program the next function code or exit programming mode by entering 99 on Series
600 Keyboard numeric keypad or by swiping the Program Card.
23 or 33
Main Port 0 (23)
AUX Port 1 (33)
Handshaking
1. Swipe Program Card. While in programming mode, at the Series 600 Keyboard
numeric keypad, enter Function Code 23 (Port 0) or 33 (Port 1).
LED (2) turns on.
2. At Series 600 Keyboard numeric keypad, enter the applicable number (0, 1, 2 or 3) to
select handshaking per list below.
0 = none
1 = CTS/RTS
2 = XON/XOFF
3 = Both*
LED (2) turns off.
3. Program the next function code or exit programming mode by entering 99 on Series
600 Keyboard numeric keypad or by swiping the Program Card.