Uniflame GAD1200B - Manual (Page 8)

LP Gas Outdoor Fireplace Model No. GAD1200B
Installing LP Gas Tank
4O OPERATE YOU WILL NEED  PRECISION
FILLED STANDARD GRILL ,0 GAS
TANK  WITH EXTERNAL VALVE THREADS
Note: !N EMPTY STANDARD GRILL ,0 GAS TANK WEIGHS APPROXIMATELY
 LBS ! PRECISION
FILLED STANDARD GRILL ,0 GAS TANK SHOULD WEIGH
NO MORE THAN  LBS
Caution: LP gas tank must be properly
disconnected and removed prior to moving this
grill.
Need a tank of gas? 4RY TANK EXCHANGE SERVICE )TS EASY FAST SAFE AND
AVAILABLE AT TENS OF THOUSANDS OF CONVENIENTLY LOCATED RETAIL OUTLETS NA-
TIONWIDE 9OU CAN PURCHASE A NEW FULL TANK OR EXCHANGE YOUR EMPTY FOR A
PRECISION FILLED ONE
Insert LP Gas Tank
WARNING: Make sure LP gas tank valve is closed. Close by turning
valve clockwise.
0LACE PRECISION FILLED ,0 GAS TANK UPRIGHT INTO HOLE IN THE BASE OF THE OUTDOOR FIREPLACE SO IT IS
ARRANGED FOR VAPOR WITHDRAWAL
Secure LP Gas Tank
4URN WING NUT CLOCKWISE UNTIL TIGHT
Connect LP Gas Tank
Before connecting, be sure that there is no debris caught in the
HEAD OF THE ,0 GAS TANK HEAD OF THE REGULATOR VALVE OR IN THE
HEAD OF THE BURNER AND BURNER PORTS
#ONNECT REGULATORHOSE ASSEMBLY TO TANK BY TURNING KNOB
CLOCKWISE UNTIL IT STOPS
Disconnect LP Gas Tank
"EFORE DISCONNECTING MAKE SURE THE ,0 GAS TANK VALVE IS
h#,/3%$v
$ISCONNECT REGULATORHOSE ASSEMBLY FROM ,0 GAS TANK BY
TURNING KNOB COUNTERCLOCKWISE UNTIL IT IS LOOSE
Caution: LP gas tank must be properly
disconnected and removed prior to moving
this grill.
Assembly Instructions (continued)
13
Insert Battery
Note: 2EMOVE PLASTIC WRAPPER BEFORE INSTALLING BATTERY
%
x 1
14
Remove or Attach Side Panel Covers