Uniden BC 278CLT - Manual (Page 24)

21
Searching
The BC278CLT can search a specific frequency range to find frequencies. To use the search
function, set a search range first.
To set the frequency range
You can set the frequency range in Manual mode, Service Scan mode, WX mode, and Search Mode.
When you wish to set the frequency range for the first time, you cannot enter Search mode.
1. Enter the lowest frequency by using the number keypad 0-9 then press ▼ LIMIT.
2. Enter the highest frequency range by using the number keypad 0-9 then press ▼ LIMIT.
To search
If you enter Search mode before setting the frequency range, Error appears on the display.
To avoid this, you have to set the frequency range before entering Search mode for the first time.
1. Press SEARCH to start searching .
2. Searching stop when a transmission is found.
3. Press SEARCH again to continue searching.
4. To exit search mode, press MANUAL .
BC278clt.qxd 3/8/00 7:34 PM Page 21