UNICOM Electric 24 User Manual

Dyna-switch/24, Specifications, Part number description

Advertising
background image

565 Brea Canyon Rd., Ste A, Walnut, CA 91789, USA
Phone: 626.964.7873 Fax: 626.964.7880
www.unicomlink.com e-mail: info@unicomlink.com

@ UNICOM 2013. UNICOM is a trademark of UNICOM Electric, Inc. All rights reserved.

Specifications subject to rev030813 UNILT031505 change without notice.

Dyna-Switch/24

FEP-31024T-3

24 Port 10/100Base-TX Fast Ethernet Switch

Features

Complies with IEEE802.3 and IEEE802.3u standards
Complies with IEEE802.3/802.3u auto-negotiation
Supports IEEE802.3X flow control for full duplex and back pressure flow control for half duplex
Support auto MDI/MDI-X crossover detecting and auto correction
Supports Link-on & cable length & Link-down Power saving
Supports IEEE802.3az energy efficient Ethernet function
Switching fabric: 4.8Gbps
Packet forwarding rate (in 64 bytes):
10M: 14881 pps
100M: 148810 pps
RoHS compliant

FEP-31024T-3 24 Port 10/100Base-TX Fast Ethernet Switch

Specifications

Interface

MAC Address Table

Buffer Memory

LED Indications

Power

Dimensions

Case

Temperature

Humidity

Safety

EMC

24*10/100 Mbps RJ-45 ports

8K

256K bytes

1*power LED (Power: Green)

24*port LEDs (Link/Act: Green)

Internal power supply

Input 100-240VAC 50-60hz

267*161.5*42 mm

10.6*6.4*1.7 inch

Metal

Operating: 0°C ~ 40°C (32°F ~104°F)

Storage: -40°C ~ 70°C (-40°F ~158°F)

Operating: 10% ~ 90% RH, non-condensing

Storage: 5%~90% RH, non-condensing

CE, LVD

FCC, CE Class A

Part Number

Description

U

nicom’s Dyna-Switch/24 is the affordable and efficient way

to upgrade your network. With 10/100Mbps ports, the Dyna-
Switch/24 offer everything a small office environment would
need in a convenient, desktop package.

This switch will fit neatly on a desktop or can be rack mounted
with the included mounting brackets. The powerful Dyna-
Switch/24 has dedicated 10/100Mbps bandwidth and the
full-duplex operation mode effectively doubles the band-
width for each port. This can increase the bandwidth of
10Mbps Ethernet port and the 100Mbps fast Ethernet port to
20Mbps and 200 Mbps, respectively. To enhance the packet
transmission, this switch support IEEE 802.3 full-duplex flow
control and half-duplex back pressure congestion control.

Most hubs and switches are designed with one uplink port to
cascade other hubs or switches. Now, the Micro-Switch/5
supports new MDI/MDIX technology - each port can be either
a normal port or an uplink port offering an automatic cross-
over function to either 10Base-T or 100Base-TX allowing you to
use either a pin-to-pin or crossover cable with no worry.

*Automatic MDI/MDIX Crossover

Advertising
This manual is related to the following products:

16