plawa-feinwerktechnik GmbH & Co.KG DC-735 - Manual (Page 23)

- 22 -
3. Shoot the image.
Each option automatically switches to single shot in the following situation:
yAfter each shot.
yWhen the mode switched.
yWhen the camera is turned off.
Using the Macro mode
Your camera is equipped with a macro function that allows you to focus on very close subjects.
In macro mode you can focus on subjects 10 cm from the lens when in the maximum wide angle
(zoomed out) setting and 80 cm in the maximum telephoto (zoomed in) setting.
1. Set the camera to the record mode
z You can use the macro mode in still image
shooting or movie recording.
2. Press the button to enter the macro mode.
yThe macro mode icon ( ) appears on the
LCD monitor.
3. To leave the macro mode, press the button
again.
NOTE:
yDistances referred to measure the distance between the camera lens surface and the
subject.
NOTE:
yWhen using the self-timer function, be sure to use a tripod or place the digital camera on a
level, stable surface.